Self Install Inverter Split Air Conditioner Unit 12000btu with Heat Pump - ECO0906SQ
Part No: ECO0906SQ
- INVERTER driven unit so fully variable high efficiency output
- Cooling capacity 2400 - 12000BTU/hr / 0.7 - 3.5 kW (Nominal rating 9000BTU/Hr / 2.6kW)
- Heating capacity 2400 - 12500 BTU/hr / 2.7 - 3.7 kW
- Up to 23m2 room size (indication only)
- A rated Energy efficiency
- COP Value of 3.62 / EER Value of 3.26
- Ultra quiet indoor unit operation - as low as 29dB
- Bi-directional air vanes
- Auto restart
- 24 Hour Sleep Timer
- Digital LED display
- Full function remote control
- Easy '2 click' connection
The first Inverter driven split self install air conditioner unit system that is capable of full self installation.
The ECO0906SQ is a 12000 BTU/hr split wall mounted inverter driven air conditioner with heat pump. This wall mounted split self install air conditioner unit comes with a pre-charged 4m connector pipe.
This self install air conditioner is capable of being installed by any competent 'diy-er' or contractor in typically about 2-3 hours. There are basically two parts - the indoor unit whcih mounts high up on the wall and the outdoor (condensor) unit which stands outside. The two are connected by an umbilical chord that carries the refrigerent back and forth as well the power for the outside unit. The umbilcal is permanentally attached to the back of the indoor unit and is coupled to the outdoor unit using a quick coupling system that ensures no gas escapes (and an electrical multiway connector for the power)
So - to install these units is quite simple. Mount the indoor unit onto the wall using the wall plate provided. Make a hole though the wall to outside (this needs to be about 100mm diameter - enough to pass the quick coupling connector at the end of the umbilical through - the umbilical itself is smaller than this - typically about 75 x 50 mm). The outdoor unit is then connected outside to the umbilical for both refrigerent and power. All you need to do then is wire up the indoor unit to a plug and the system is ready to turn on. The outdoor unit is supplied as standard with rubber feet to stand on a flat surface. You can optionally buy a wall bracket for the outdoor unit (see related items below) should you wish to mount the unit up on the wall.
Our Price: £579.96 (£483.30 + VAT)
Availability: In Stock
Normal Price: £714.20
You Save: £134.24
Addtional features of the ECO0906SQ Inverter Split Self Install Air Conditioner include:
- 4 metre umbilical
- Set temperature range 17-30C
- Ambient (external) temperature range -15C to +34 C heating mode, 0-50C cooling mode
- Refrigerent - R410A
- Dimensions - Indoor 790 x275x190 Outdoor 760x590x285 mm
- Net Weight indoor / outdoor 12.5 / 41 kg
- Operating pwer (kW) cooling/heating 0.2-1.2 / 0.2-1.1 A
- Power supply 220-240~50Hz~single phase max 13 A
Coupling the indoor and oudoor units together is easy and safe - click on the video below to see just how quick and easy it is....
INVERTER THEORY - Why is it better?
An inverter air conditioner is more efficient in saving energy and gives better temperature control. It's compressor motor is driven by direct current ( a current inverter is installed in the unit - hence the name) and its speed is variable. The inverter regulates the temperature by speeding up or slowing down the rpm of the compressor according to demand. When the desired room temperature is reached, the compressor motor will run at a constant medium speed.
A conventional air conditioner regulates temperature simply by turning the compressor on and off. Teh compressor can only run at one speed - full speed so draws full power all the time it is running. The start up process consumes 3 times more electricity and the room temperature canl also fluctuate more as the unit cannot provide a varaible level of output.
WHY BUY A QUICK COUPLING SYSTEM?
The unit above is a sealed precharged system so are LEGAL for unqualified people to install themselves. In the UK it is ILLEGAL to self-install systems where you bend your own copper pipe and fill them with refrigerent simply by opening service valves on the units and bleeding the air to atmosphere.Venting of refrigerent gases to the atmosphere is illegal. Open pipe systems BY LAW have to be installed by an approved refrigeration contractor (the equivalent of CORGI Gas approval) using specialised equipment that evacuates the pipework and then charges the system using self contained gas exchange units. Our sealed umbilical systems do not vent gas in any way and are therefore quite safe and legal to install yourself.
|
| Installation of ECO0906SQ self install |
|
Brilliant piece of kit and quite straight forward to install although it would be much better if the pipe work was 6mtrs instead of 4.But would definitely use this product again.
Reviewed 21 March 2013 by Mike, Manchester |
|
|
 |